|
|
ecu
(Preview)
hi i hav a vitara 1998 with error code 81 how can i clear this or match them i have friend with computer thing but he dont have the old connectors that are on the suzuki. spent so much on this jeep now as had so many problems. and the garage local to me are so expensive. help
|
philby
|
3
|
1602
|
|
|
|
|
|
Fault Code Registers
(Preview)
1112 ECU Address (current faults) Bit7 - IAT Low (Code 25) bit6 - VSS (Code 24) Bit5 - IAT High (Code 23) Bit4 - TPS Low (Code 22) Bit3 - TPS High (Code 21) Bit2 - WTS (Code 15) Bit1 - WTS (Code 14) Bit0 - O2 Sensor (Code 13) Address 1 (current faults) Bit7 - GND Circuit (Code 53) bit...
|
TechSupport
|
0
|
2187
|
|
|
|
|
|
1998 Suzuki Jimny G13BB
(Preview)
Can I ask for some help please. I have tried OBD2 hand held readers that do not work so now I think I will move to a laptop to read the ECU and begin to play. I want a cable that will connect USB2 to a PC and fit a Jimny 1998 plug. There is a few on Ebay but most says that they work on Petrol cars 2001 and above. Can any...
|
Fieldsports
|
4
|
3420
|
|
|
|
|
|
Tech1 switch
(Preview)
This is odd, I found this on the PCB for the 70F00 Alto ECU. Its an unpopulated locaation for a 3-way switch, the silkscreen seems to indicate that it can select any of six channels and its labelled Tech1 ?? It would seem to be some sort of factory test setup. I hadn't envisaged doing anything much with thi...
|
TechSupport
|
2
|
2159
|
|
|
|
|
|
Windows 7
(Preview)
Just for those who might be curious - the Rhinoview v0.5 appears to work find on Windows 7.
|
fordem
|
3
|
2226
|
|
|
|
|
|
Temperature Sensor configuration
(Preview)
The configuration file now includes gain and offset values for the WTS and IAT sensors. To determine the correct values for any given ECU the following procedure can be used. Oen the confguration file and set WTSGAIN and IATGAIN to 1, set WTSOFF and IATOFF to 0, this will ensure that raw data values are...
|
TechSupport
|
0
|
1802
|
|
|
|
|
|
ECU definition files
(Preview)
ECU definition files are not used in Rhinoview from v9.0 onwards. Definition files for TunerPro RT software can be created on request.
|
TechSupport
|
0
|
3316
|
|
|
|
|
|
Locating OBD addresses
(Preview)
If your ECU is not currently supported then you will need to build an address map. Some functions may work correctly, others may not not. There are several ECU options that can be tried to find one that works best. You may need to determine where some addresses are, here is a rough guide on how to do that. 1...
|
TechSupport
|
0
|
4256
|
|
|
