If it doesn't work at 156525 or 7812 baud then try changing the baud rate to 10400, you'll need to type it in. if you only have 3-pins on the connector and you have 12V supply and 5V on the SDL pin then it should connect.
Send me a PM, you're probably not far from me, I may be able to pop over and take a look.
-- Edited by TechSupport on Monday 18th of March 2024 07:22:34 PM
__________________
1984 Suzuki SJ413K pick up, 1.6 16V Baleno engine 2000 Suzuki Vitara 1.6 8V, many mods 2004 Suzuki Ignis 1.5VVT 4Grip 2006 Suzuki Jimny 1.3VVT JLX+ and many more.
Hi, My friend and I have a 2000 Suzuki Carry DB52T with 6FA engine that is having a few issues at the moment. We've purchased the SDL Interface and the ALDL adapter (I don't thing we need the adapter.) to try and diagnose the issue with our little truck.
We're not currently able to connect to the truck with the software and I was hoping I might be able to get some assistance in hopefully getting this working.
We're have downloaded the 1.4v of the software and drivers and when we open up the software we get the 'SDL interface connected', but any kind of connecting just results in RX errors that just increment.
I've tried to problem solve this as best I can, we've also tried reading through the help documentation but that took a while to get working:
1. we're on windows 11 and maybe there is an issue with this running the same with the help files?
2. The DB52T 6FA engine isn't supported by this software?
3. do we need to send the ECU ID to you?
Thanks for your patience and time in reading this!
